This build was created because our group has a plethora of WW2 20mm and mine was infrequently used. I started with some building that I could winterize. I used PVA and Woodland Scenics Soft Snowflake extensively through this build.
This build was created because our group has a plethora of WW2 20mm and mine was infrequently used. I started with some building that I could winterize. I used PVA and Woodland Scenics Soft Snowflake extensively through this build.
This build was created because our group has a plethora of WW2 20mm and mine was infrequently used. I started with some building that I could winterize. I used PVA and Woodland Scenics Soft Snowflake extensively through this build.
This build was created because our group has a plethora of WW2 20mm and mine was infrequently used. I started with some building that I could winterize. I used PVA and Woodland Scenics Soft Snowflake extensively through this build.
This build was created because our group has a plethora of WW2 20mm and mine was infrequently used. I started with some building that I could winterize. I used PVA and Woodland Scenics Soft Snowflake extensively through this build.
I then built hedges using hanging basket coconut husk and cut them to size. I glued them to a base of Gaterfoam, similar to Foamcore but a stiff foam. I took tweezers and pull the hedge apart to so it looked more wild. I then painted white then Soft Snow Flake.
I then built hedges using hanging basket coconut husk and cut them to size. I glued them to a base of Gaterfoam, similar to Foamcore but a stiff foam. I took tweezers and pull the hedge apart to so it looked more wild. I then painted white then Soft Snow Flake.
I then built hedges using hanging basket coconut husk and cut them to size. I glued them to a base of Gaterfoam, similar to Foamcore but a stiff foam. I took tweezers and pull the hedge apart to so it looked more wild. I then painted white then Soft Snow Flake.
I already had some rubber roads and winterized them using Soft Snowflake (SSF) PVA and water mixed to make a mash, stuck it on then sprinkled more SSF on top. In the ruts I just put watered down PVA and SSF then scraped them to look like ruts. SSF for the trees I had already.
I already had some rubber roads and winterized them using Soft Snowflake (SSF) PVA and water mixed to make a mash, stuck it on then sprinkled more SSF on top. In the ruts I just put watered down PVA and SSF then scraped them to look like ruts. SSF for the trees I had already.
I already had some rubber roads and winterized them using Soft Snowflake (SSF) PVA and water mixed to make a mash, stuck it on then sprinkled more SSF on top. In the ruts I just put watered down PVA and SSF then scraped them to look like ruts. SSF for the trees I had already.
1st photo, I bought these from Scenic Route Models painted white and added SSN. It's a back yard for an existing house. 2nd photo scratch built fence using coffee stir stick and matchsticks, again added SSF.
1st photo, I bought these from Scenic Route Models painted white and added SSN. It's a back yard for an existing house. 2nd photo scratch built fence using coffee stir stick and matchsticks, again added SSF.
1st photo, I bought these from Scenic Route Models painted white and added SSN. It's a back yard for an existing house. 2nd photo scratch built fence using coffee stir stick and matchsticks, again added SSF.
1st photo, I bought these from Scenic Route Models painted white and added SSN. It's a back yard for an existing house. 2nd photo scratch built fence using coffee stir stick and matchsticks, again added SSF.
1st photo, I bought these from Scenic Route Models painted white and added SSN. It's a back yard for an existing house. 2nd photo scratch built fence using coffee stir stick and matchsticks, again added SSF.
I had bought telephone poles at our local con for $5 a big bag full. Based, added some features and SSF. The Haystacks are lids of spray cans painted dark yellow/brown, then glued cut off sections of floor mat, based and SSF.
I had bought telephone poles at our local con for $5 a big bag full. Based, added some features and SSF. The Haystacks are lids of spray cans painted dark yellow/brown, then glued cut off sections of floor mat, based and SSF.
I had bought telephone poles at our local con for $5 a big bag full. Based, added some features and SSF. The Haystacks are lids of spray cans painted dark yellow/brown, then glued cut off sections of floor mat, based and SSF.
Here's where I went a little nuts. A friend cut 1/8 plywood on his laser cutter, I drilled holes for the matchsticks 6" and 3" sections. I drilled out the matchsticks to thread the barbed wire through. Painted them white, I built 13' of these, 114 matchsticks drilled twice. Crazy
Here's where I went a little nuts. A friend cut 1/8 plywood on his laser cutter, I drilled holes for the matchsticks 6" and 3" sections. I drilled out the matchsticks to thread the barbed wire through. Painted them white, I built 13' of these, 114 matchsticks drilled twice. Crazy
Here's where I went a little nuts. A friend cut 1/8 plywood on his laser cutter, I drilled holes for the matchsticks 6" and 3" sections. I drilled out the matchsticks to thread the barbed wire through. Painted them white, I built 13' of these, 114 matchsticks drilled twice. Crazy
Here's where I went a little nuts. A friend cut 1/8 plywood on his laser cutter, I drilled holes for the matchsticks 6" and 3" sections. I drilled out the matchsticks to thread the barbed wire through. Painted them white, I built 13' of these, 114 matchsticks drilled twice. Crazy
Here's where I went a little nuts. A friend cut 1/8 plywood on his laser cutter, I drilled holes for the matchsticks 6" and 3" sections. I drilled out the matchsticks to thread the barbed wire through. Painted them white, I built 13' of these, 114 matchsticks drilled twice. Crazy
I put bits of moss on the base then SSF. It's coming together. A couple more test photos.
I put bits of moss on the base then SSF. It's coming together. A couple more test photos.
I put bits of moss on the base then SSF. It's coming together. A couple more test photos.
I put bits of moss on the base then SSF. It's coming together. A couple more test photos.
I put bits of moss on the base then SSF. It's coming together. A couple more test photos.
Sgt. Majors Germans in winter kit. A full Rapid Fire Battalion.
Sgt. Majors Germans in winter kit. A full Rapid Fire Battalion.
Sgt. Majors Germans in winter kit. A full Rapid Fire Battalion.
Sgt. Majors Germans in winter kit. A full Rapid Fire Battalion.
Sgt. Majors Germans in winter kit. A full Rapid Fire Battalion.
I had trouble finding wagons in 20MM so I asked Glenn at Scenic Route to create these which he did. The welding tanks I created from the parts box German MkIV exhaust pipes. I went to Glenn's website and they are not there? I sent him an email, no answer.
I had trouble finding wagons in 20MM so I asked Glenn at Scenic Route to create these which he did. The welding tanks I created from the parts box German MkIV exhaust pipes. I went to Glenn's website and they are not there? I sent him an email, no answer.
I had trouble finding wagons in 20MM so I asked Glenn at Scenic Route to create these which he did. The welding tanks I created from the parts box German MkIV exhaust pipes. I went to Glenn's website and they are not there? I sent him an email, no answer.
I had vehicles already painted for summer. I gave them all a white wash. I used Vallejo's white wash with extra white paint as needed.
I had vehicles already painted for summer. I gave them all a white wash. I used Vallejo's white wash with extra white paint as needed.
I had vehicles already painted for summer. I gave them all a white wash. I used Vallejo's white wash with extra white paint as needed.
I had vehicles already painted for summer. I gave them all a white wash. I used Vallejo's white wash with extra white paint as needed.
I had vehicles already painted for summer. I gave them all a white wash. I used Vallejo's white wash with extra white paint as needed.
I bought some AB Miniatures British Infantry in leather jerkin, and painted them up. A full Rapid Fire battalion.
I bought some AB Miniatures British Infantry in leather jerkin, and painted them up. A full Rapid Fire battalion.
I bought some AB Miniatures British Infantry in leather jerkin, and painted them up. A full Rapid Fire battalion.
I bought some AB Miniatures British Infantry in leather jerkin, and painted them up. A full Rapid Fire battalion.
I bought some AB Miniatures British Infantry in leather jerkin, and painted them up. A full Rapid Fire battalion.
I had a 20mm Gulashwagon with a captured Jeep. I also purchased winter tufts from Leadbear and also made scratch built some.
I had a 20mm Gulashwagon with a captured Jeep. I also purchased winter tufts from Leadbear and also made scratch built some.
I had a 20mm Gulashwagon with a captured Jeep. I also purchased winter tufts from Leadbear and also made scratch built some.
I had a 20mm Gulashwagon with a captured Jeep. I also purchased winter tufts from Leadbear and also made scratch built some.
I had a 20mm Gulashwagon with a captured Jeep. I also purchased winter tufts from Leadbear and also made scratch built some.
A lot of the ideas for this build were from this book by Pat Smith. Much of the credit belongs to him. I scratch built some fence gates using stir sticks and a horse or cow trough from matchsticks. @AdamPre53040693 @tomjmegan @wargamesodyssey
A lot of the ideas for this build were from this book by Pat Smith. Much of the credit belongs to him. I scratch built some fence gates using stir sticks and a horse or cow trough from matchsticks. @AdamPre53040693 @tomjmegan @wargamesodyssey
A lot of the ideas for this build were from this book by Pat Smith. Much of the credit belongs to him. I scratch built some fence gates using stir sticks and a horse or cow trough from matchsticks. @AdamPre53040693 @tomjmegan @wargamesodyssey
A lot of the ideas for this build were from this book by Pat Smith. Much of the credit belongs to him. I scratch built some fence gates using stir sticks and a horse or cow trough from matchsticks. @AdamPre53040693 @tomjmegan @wargamesodyssey
You can follow @Medical_Int.
Tip: mention @twtextapp on a Twitter thread with the keyword “unroll” to get a link to it.

Latest Threads Unrolled:
Those who think consciousness raising & movement building are disconnected, or even a distraction from electoral politics have not paid attention to the history of social change.In this thread, we
Read more
The 2020s will be known as the Remote Work decadeA few predictions of what is likely to emerge[ a thread ] Third Space: Office and Working from Home will
Read more
1/29: Have you ever had a concept explained to you that helps frame complex issues you’ve been wrestling with and opens your eyes to new possibilities? A concept that I
Read more
By continuing to use the site, you are consenting to the use of cookies as explained in our Cookie Policy to improve your experience.