Thread by @YGuncannon, Titans test team ready now let's read through them We are gonna [...]

Titans test team ready now let's read through them

We are gonna talk about all the tr line of mobile suit

RX-121 Gundam TR-1 ［Hazel］

The RX-121 Gundam TR-1 [Hazel] is a Mobile Suit from the Gundam Universal Century time-line. It was featured in the photo-novel and manga Advance of Zeta: The Flag of Titans

The RX-121 Gundam TR-1 [Hazel] is a functional test machine assigned to the Murphy team, based upon the GM Quel. It was equipped with a Gundam head in order to test its psychological effectiveness against Zeon remnants,

though it was actually modified from an existing GM-Quel head instead of a true RX-type Gundam head

As it is developed for use in combat, as well as used as test machine, many of its parts have been replaced with enhancement parts like the new backpack, the movable booster pod attached, and the improved thrusters in its legs. As a result, its potential rivals that of an RX type

Its beam rifle is a prototype version of the energy pack type which the next generation of machines are expected to carry, and this machine has also been used in the development and testing of other devices such as the shield booster

Also, the support actuator units on the Hazel's shoulders can be fitted with either multipurpose launchers, or holding grips to help stabilize its arms while in High Mobility Form. Its skirt armor is usually fitted with energy pack holders which store two energy packs apiece.

The Hazel's most distinctive equipment is the shield booster, which contains propellant tanks and a single thruster with an output of 22,000 kg. This device is a further evolution of the sturm boosters used by earlier mobile suits,

unlike its ancestors the shield booster is retained as a shield after its propellant supply is exhausted. The Hazel's Assault Form is equipped with two shield boosters, one on each arm, and its High Mobility Form also carries one on its movable booster pod.

Although the original Hazel's specs are unknown, it spec is probably weaker than Hazel Custom, making its overall specs are probably very similar to those of the RX-78GP01 Gundam "Zephyranthes

ARMAMENTS

60mm Vulcan gun

A standard armament of the Earth Federation Forces's Mobile Suits is a pair of head mounted 60mm vulcan guns. These shell firing weapons have a high-rate of fire but little power.

Beam saber

The standard close combat armament for Earth Federation mobile suits, it is a small cylindrical device held in the mobile suit's hands when operated and is powered by a rechargeable energy capacitor. The beam saber emits a blade of plasma contained by an I-field

XBR-M84a Beam Rifle

Gundam TR-1 [Hazel] can be equipped with a XBR-M84a Beam Rifle. The particle beam fired from a beam rifle can penetrate almost any armor that has not been treated with specific counter-measures

SPECIAL EQUIPMENT & FEATURES

Dual Shield Booster

Two Shield Boosters are attached to both arms of the Gundam TR-1 [Hazel], which contains propellant tanks and a single thruster with an output of 22,000 kg.

CONFIGURATION

RX-121 Gundam TR-1 [Hazel] Full Armor Form

Like the RX-78NT-1 Gundam "Alex" developed during the One Year War, the RX-121 Gundam TR-1 [Hazel] is designed to use a Full Armor system. The Hazel is based on the RGM-79Q GM Quel, with enhancement parts added to each section to give it the high performance of a Gundam-type MS

Of these enhancement parts, the "white parts" of the backpack, skirt armor, and leg sections are fixed in place, and only the armor on the front of its torso constitutes a detachable Full Armor system. When this detachable bulletproof armor is installed on the front of its torso

the armor damaged in battle can be easily replaced, which is an advantage in terms of maintenance. However, since the extra armor also increases the machine's weight, it has the drawback of impairing the Hazel's maneuverability

RX-121 Gundam TR-1 [Hazel] High Mobility Form

The High Mobility Form of the RX-121 Gundam TR-1 [Hazel] is equipped with a total of three shield boosters, one on each arm and one on the movable booster pod attached to its enhancement backpack.

When all is equipped, including the Full Armor system and the shield boosters, this is also known as the "Final Form." By orienting the thrusters of its three shield boosters in the same direction for maximum speed, it can achieve speeds comparable to those of a mobile armor

By orienting the thrusters of its three shield boosters in the same direction for maximum acceleration, it can achieve speeds comparable to those of a mobile armor. Holding grips designed specifically for this High Mobility Form can be installed in the shoulders of the [Hazel]

and it can grasp them to fix its arms in position for stable cruising. This High Mobility Form and its concept of orienting the thrusters in a single direction would have a significant influence on the later development of transformable mobile suits by the Titans.

RX-121 Gundam TR-1 [Hazel Custom]

After Lt. Wes Murphy's Gundam TR-1 [Hazel] was heavily damaged in combat with Zeon remnants, it is repaired and improved using a RGM-79Q GM Quel stationed at Konpeitoh and spare Hazel parts stored aboard the Aswan.

This "Hazel Custom" reflects the combat data and development know how accumulated by the original Hazel. The machine's enhancement parts, which previously seemed like an afterthought, have been better balanced with the other parts and the machine's internal structure

As a result, its external appearance has a more unified feel, and its lighter weight and increased thruster output give it roughly 10% greater acceleration. A 360-degree panoramic monitor and linear seat system have been installed in its cockpit on an experimental basis,

and its operating system has also been upgraded, so this machine's operation is greatly advanced from the original Hazel. The model number of this rebuilt Hazel has been shifted from RX-121 to RX-121-1. Because the Hazel's unique shield boosters were lost in its previous battles,

the Hazel Custom is equipped with a normal shield for the time being. The loss of the shield boosters admittedly reduces the Hazel Custom's mobility, but its overall performance increase is enough to make up for this

Due to its redeployment schedule there wasn't time to repaint the machine in Titans colors, so most of its armor remains the grey color in which it was molded

The Hazel Custom's basic specs, including its generator and thruster performance, are similar to those of the GM Quel. Its leg sections house thermonuclear rocket engines with an output of 17,500 kg apiece

and its backpack is equipped with the same movable booster pod as the original Hazel. The thermonuclear reactor inside this pod serves as both a supplemental generator and a hybrid jet/rocket engine

with an output of 390 kW and 18,000 kg respectively. The Hazel Custom retains the support actuator units and enhancement parts of the original Hazel, and can carry all the same equipment.

A multi weapon latch can be plugged into its center skirt armor to support options like a sub arm unit or a flexible beam rifle unit,and another multipurpose latch is located above its cockpit hatch. While the Hazel Custom's High Mobility Form is identical to that of the original

its Assault Form is equipped with the same booster pod used by the RMS-117 Galbaldy β High Mobility Type, rather than the Hazel's usual movable booster pod. Two shield boosters are attached to this booster pod

and the mobile suit is also equipped with the Galbaldy β's extendable shield

ARMAMENTS

Beam Saber

Vulcan Gun

XBR-M84a Beam Rifle

Long Blade Rifle

SPECIAL EQUIPMENT & FEATURES

Shield Booster

Multi-purpose Weapon Latch

Moveable Booster Pod

Sub Arm Unit

CONFIGURATION

Gundam TR-1 [Hazel Custom] Sniper Unit

A variation of the Hazel Custom, this version features the long blade rifle used by the RX-121-1+FF-X29A Gundam TR-1 [Hazel-Rah]. Equipped with one shield booster, this version also features a monoeye visor in place of the standard dual eyes

Gundam TR-1 [Hazel Custom] Sub Arm Unit

The multi weapon latch in the center skirt armor of the RX-121-1 Gundam TR-1 [Hazel Custom] is designed to serve as a multipurpose joint for various option parts used by the Hazel.

This sub arm unit, one of the devices intended to connect to the multi weapon latch, contains secondary arms folded away inside what looks at first glance like extra skirt armor.

These sub arms allow the Hazel to carry a beam rifle or other weapons even when both its main arms are obstructed by the attachment of shield boosters. The sub arms can also be used to wield secondary weapons like beam sabers

Despite the effectiveness of the Sub Arm unit, the complexity they add to the mobile suit's fire control means they require a high degree of pilot skill, so this system is never widely adopted.

RX-121-1+FF-X29A Gundam TR-1 ［Hazel-Rah］

The configuration of the RX-121-1 Gundam TR-1 [Hazel Custom] equipped with the FF-X29A G-Parts [Hrududu] is known as the RX-121-1+FF-X29A [Hazel-Rah].

When attached to the Hazel Custom, the Hrududu functions as a supplemental propulsion device, and active movement of its left and right wing units also produces AMBAC effects, allowing them to act as high mobility binders. The addition of the Hrududu, which also has sub-sensors

to the Hazel Custom raises its mechanical performance to a level rivaling that of a second-generation mobile suit. When equipped with the Hrududu's parts

the Hazel Custom's beam rifle becomes a long blade rifle that can be used for long-range sniper attacks. Thanks to the heat blade underneath its barrel, this rifle can also be employed in melee combat.

ARMAMENTS

Beam Saber

The standard close combat armament for Earth Federation mobile suits, it is a small cylindrical device held in the mobile suit's hands when operated and is powered by a rechargeable energy capacitor.

Vulcan Gun

Mounted in the head, the pair of shell firing weapons have a high rate of fire but little power and can't damage the armor of a mobile suit, though they can damage lightly armored areas such as the sensors

Long Blade Rifle

the long blade rifle is used as a regular beam rifle, it also doubles as a shield to protect itself from enemies. It can also produce a heat blade, allowing it to cut down enemies when there's no time to deploy its beam sabers

Shield Booster

This device is a further evolution of the sturm boosters (a device which contains thrusters for increasing propulsion purposes) used by earlier MS, but unlike its ancestors the shield booster is retained as a shield after its propellant supply is exhausted

Multipurpose Launchers

RX-121-1+FF-X29A Gundam TR-1 ［Hazel-Rah］ Second Form

The RX-121-1+FF-X29A Gundam TR-1 [Hazel-Rah] Second Form is equipped with two units of the FF-X29A G-Parts [Hrududu]. The Hrududu, developed as a set of enhancement parts for the RX-121-1 Gundam TR-1 [Hazel Custom]

is designed to connect not only to its backpack joint, but also to its multi weapon latch and the side armor of its waist section

This form is equipped with a total of four binder-like wing units, and the functions of the upper and lower pairs are standardized, with two thruster wing units on the backpack for propulsion and two claw wing units on the waist to carry and control weapons

The machine's operating efficiency is thus raised to its maximum limit. The Hrududu's nose sensor unit can also be used as a connector for shield boosters. This makes it possible to attach two shield boosters to a single one of the mobile suit's arms

By this point, the Hazel Custom has been repainted in official Titan colors and equipped with the same optical sensor unit and foot thrusters as the RX-121-2A Gundam TR-1 [Advanced Hazel].

The two machines can still be distinguished by their distinctive booster pods, and the fact that the Hazel Custom's waist armor is painted the same dark blue as its chest.

The [Hazel-Rah] Second Form can also be equipped with the booster used by the ORX-005 Gaplant. By orienting the thrusters of the Gaplant booster, the four wing units, and the two shield boosters in the same direction, it can achieve tremendous thrust

This could be described as a cruising form which places an emphasis on acceleration, rather than general-purpose combat capability as a mobile suit.

With the long cruising range and powerful acceleration provided by the Gaplant booster, the Hazel-Rah can perform independent attacks over ranges that would normally be inconceivable

As a result, it can use its acceleration for hit-and-run tactics and carry out special operations such as raiding attacks deep into enemy territory.

ARMAMENTS

Beam Saber

Vulcan Gun

Shield Booster

Beam Rifle

Long Blade Rifle

RX-121-2A Gundam TR-1 ［Advanced Hazel］

The RX-121-2A Gundam TR-1 [Advanced Hazel] is the remodeled RX-121-2 Gundam TR-1 [Hazel II], with leg enhancement parts and a multi weapon latch installed to match its specifications to those of the RX-121-1 Gundam TR-1 [Hazel Custom].

A high-performance optical sensor unit like that of the RGM-79SR GM Sniper III has been added to its head,and supplemental thruster units to the soles of its feet. The movable booster pod on its enhancement backpack has also been replaced with a new type, tested on the galbaldy β

which can be fitted with two shield boosters to increase its performance still further. The enhanced shield booster has ten diffuse beam guns installed on its surface, which increase the mobile suit's defensive capabilities by shooting down missiles and other projectile weapons

However, the shield booster's propellant capacity is reduced accordingly, giving it lower performance as a booster. All the test results of previous option parts were used in the creation of the Advanced Hazel, which could be considered the current "completed form" of the Hazel

Testing of the new booster pod with two shield boosters was originally meant to be conducted with the RMS-117 Galbaldy β High Mobility Type. However, this Galbaldy β was lost when Lt Maxim Gunar defected to the AEUG. The tests were thus performed with the Hazel II

and their results are reflected in the Advanced Hazel. The new booster pod lacks the generator and thruster equipment of the previous version, and consists of little more than latches for the shield boosters and an optional propellant tank, acting as a multi-connector pod.

Meanwhile, the sub arm unit was also adopted due to the good results of its testing with the Hazel Custom.

ARMAMENTS

60mm Vulcan Gun

A standard armament of the Earth Federation Forces's Mobile Suits is a pair of head mounted 60mm vulcan guns. These shell firing weapons have a high-rate of fire but have little power

Beam Saber

The standard armament for melee combat for Earth Federation mobile suits is the beam saber. The beam saber is a small cylindrical device held in the mobile suit's hands when operated and is powered by an energy capacitor that is recharged from special racks

Beam Rifle

Beside from the Machine Gun, Advanced Hazel can also equipped with a Beam Rifle. The particle beam fired from a beam rifle can penetrate almost any armor that has not been treated with specific counter-measures

90mm Machine Gun

The Machine Gun is a simple shell-firing machine gun that is based on older technologies, making it a weapon that can be cheaply produced and can be used by just about any mobile suit. The weapon has no where near the power of a beam rifle

Shield

A basic optional arm-mounted defense armament for many Federation mobile suits. The shield is a thick sheet of armor designed to take severe punishment that would normally destroy a mobile suit.

Booster

Two Shield Booster are attached with the back of the MS, which contains propellant tanks and a single thruster with an output of 22,000 kg. This device is a further evolution of the sturm boosters (a device which contains thrusters for increasing propulsion purposes)

RX-121-3C Gundam TR-1 ［Haze'n-thley］

The RX-121-3C Gundam TR-1 [Haze'n-thley] is considered as the final unit of the Hazel series, which uses components from the RX-124 Gundam TR-6 [Haze'n-thley II] and the RX-121-2A Gundam TR-1 [Advanced Hazel].

As a result, virtually all the RGM-79Q GM Quel parts that remained in the Hazel are replaced by enhancement parts from both the TR-6. Because it uses the unmodified upper body of the Woundwort high-speed fighter form

its head, chest, and shoulders are different in shape from those of the Hazel. This is possible because the body of the TR-6 is the same size as the Hazel's Primrose escape system. It appears that the TR-6 components are on top of a RX-121-2 Gundam TR-1 [Hazel Owsla] torso

since the head and chest structures of the Owsla are visible underneath the new enhancement parts. The TR-6 booster pod is likewise connected to the same movable booster pod used by the original Hazel.

Finally, the chest and arms of the base TR-6 mobile suit are attached to the waist of the Haze'n-thley as a sub-arm unit.

ARMAMENTS

60mm Vulcan Guns

A standard armament of the Earth Federation Forces's Mobile Suits is a pair of head mounted 60mm vulcan guns. These shell firing weapons have a high-rate of fire but have little power

Beam Sabers

The standard armament for melee combat for Earth Federation mobile suits is the beam saber. The beam saber is a small cylindrical device held in the mobile suit's hands when operated and is powered by an energy capacitor that is recharged from special racks

90mm Machine Gun

The Machine Gun is a simple shell-firing machine gun that is based on older technologies, making it a weapon that can be cheaply produced and can be used by just about any mobile suit

Long Blade Rifle

The most unique weapon of the Haze'n-thley which is first used by the RX-124 Gundam TR-6 [Woundwort]. As the long blade rifle is used as a regular beam rifle, it also doubles as a shield to protect itself from enemies

Sub-Arm Unit

A Pair of Sub-arm units were installed into the Haze'n-thley. The sub arm unit, one of the devices intended to connect to the multi weapon latch, contains secondary arms folded away inside what looks at first glance like extra skirt armor

Booster Pod

The Haze'n-thley uses the same booster pod similar to the Regular Hazel, which contains propellant tanks and a single thruster with an output of 22,000 kg. This device is a further evolution of the sturm boosters used by earlier mobile suits

Emergency Escape Pod [Primrose]

An special type of escape pod, based on research and development conducted by the Konpeitoh technical headquarters after Lieutenant Wes Murphy’s Hazel was heavily damaged in combat with Zeon remnants.

RX-121-3C Gundam TR-1 ［Haze'n-thley-Rah II］

The Haze'n-thley-Rah II is a combat form of the Haze'n-thley that resembles the RX-121-1+FF-X29A Gundam TR-1 [Hazel-Rah] Second Form, which consisted of the Haze'n-thley being equipped with four Hrdudu II units

Being a further development of the Haze'n-thley, which was considered the ultimate war-time development of the Hazel, it featured combat abilities that surpassed most machine's even among the TR-1 series. Although several modifications had been field tested with the TR-1 series

the Haze'n-thley-Rah II form proved itself to be the most well balanced, capable of displaying maximum performance and flexibility in various mission scenarios and in any environment.

The Haze'n-thley-Rah II deletes the sub arm unit attached to the waist of the standard Haze'n-thley. A double shield type booster pod is attached to its waist, with the drum frame and folding sub arm unit that make up the core section of the Hrdudu II.

An additional booster pod, drum frame, and sub arm unit are attached to its back. The Haze'n-thley-Rah II is also equipped with four of the same multi arm units used by the ORX-005 Gaplant TR-5 [Hrairoo].

ARMAMENTS

Boost Pod Vulcan

Beam Cannon

Mega Particle Cannon

Leg Missile

Big Wig Cannon

Composite Shield Booster

Gaplant Booster

CONFIGURATION

RX-121-3C Gundam TR-1 [Haze'n-thley-Rah II] Cruise Form

A form similar to the RX-124 Gundam TR-6 [Haze'n-thley II-Rah] Cruise Form. It's armed with an additional shield booster and the the Big Wig Cannon,a long ranged weapon derived from the YRMS-106+BL-85X Bi-Zack TR-2 [Bigwig]

RX-121-1 Gundam TR-1 ［Hazel Custom］ Icarus Unit

The Icarus Unit is an equipment option for the RX-121-1 Gundam TR-1 [Hazel Custom] based on the concept of unassisted mobile suit flight under gravity. Lacking the ability to transform from mobile suit form to flight form like the NRX-044 Prototype Asshimar TR-3 [Kehaar]

this revolutionary system achieves flight through brute force, thanks to the high thrust produced by the powerful thermonuclear jet engines attached to its lower body and the thermonuclear rocket engines in its shoulders

The Icarus Unit shoulder parts can swivel forward 90 degrees for storage inside the ORX-005 Gaplant TR-5 [Hrairoo],and they have option latches for attaching weapons,shields,or sub arm units.The winglike devices in the shoulder parts function as attitude stabilizers during flight

The waist parts contain a supplemental generator similar to that used in the Hazel Custom's movable booster pod, albeit somewhat larger.

In the early stages of the aerial combat unit development project, the plan was to equip the Icarus Unit with aerodynamic wing units, achieving flight through a combination of thruster power and lift

However, in mobile suit form its aerodynamic characteristics were extremely poor, and it was determined that it would be unable to move freely in three dimensions.

Thus the unit's specifications were changed to the current concept of achieving flight through high thrust.

ARMAMENTS

Beam Saber

Vulcan Gun

Beam Reflectors

Long Blade Rifle

XBR-M84a Beam Rifle

Shield Booster

Multi-purpose Weapon Latch

Sub Arm Unit

RX-121-2 Gundam TR-1 ［Hazel II］

The RX-121-2 Gundam TR-1 [Hazel II] is a RGM-79Q GM Quel [Hazel Reserve Unit] stationed aboard the Titans Test Team mothership Aswan for parts exchanges, which has been equipped with a tri booster unit.

This tri booster unit is a device with high thrust for use in assault operations, and the plan was to test it with the Hazel, but when the Hazel Reserve Unit is converted to the Hazel II this equipment is used for its main thrusters.

However, because the Hazel II was constructed in a hurry, its balance couldn't be considered entirely satisfactory. The designation "Early Type" refers to the machine in the first stage of its conversion from Hazel Reserve Unit to Hazel II

The machine's colors are also the same as those of the RGM-79Q GM Quel on which it is based, and it has not yet been painted with the Titans Test Team's characteristic yellow pinstripes

While its head remains unchanged from the Hazel Reserve Unit, the [Hazel II] Early Type is equipped with the same backpack and shoulder units as the original Hazel

However,since it doesn't carry shield boosters, its shoulders are usually fitted with multipurpose launchers rather than holding grips. It also lacks the movable booster pod of the original RX-121 Gundam TR-1 [Hazel], since the attachment point is taken up by the tri booster unit

The Tri Booster Unit is a propulsion unit made up of two universal thrusters and a large central sturm booster. The direction of the universal thrusters can be freely controlled thanks to the articulated frame that connects them to the backpack

and this kind of technology will later provide the foundation for the movable frame. Unlike previous sturm boosters, the device used in the tri booster unit is freely movable, enabling it to be used for AMBAC maneuvering

Traces of this technology can be seen in the tail stabilizers used by later machines.

After being fitted with the tri booster unit, the Hazel Reserve Unit is re-designated as a combat machine in the military database, and given the Gundam name and RX-121-2 designation as part of the Hazel series

This kind of re-designation normally requires a great deal of time and complicated formalities, but the authority the Titans enjoy within the military enables them to complete the process very quickly. This exceptional re-designation also reflects the strong desires of its pilot

The RX-121-2 Gundam TR-1 [Hazel II] is given a new color scheme when it formally enters service as Eliard Hunter's machine. Its head is also equipped with an enhanced sensor unit like that of the original RX-121 Gundam TR-1 [Hazel].

From this point on, the tri booster unit becomes standard equipment for the Hazel II. Like the original Hazel, the Hazel II can be configured in Full Armor Form. Although Wes Murphy concluded that this armor was too heavy for the original Hazel

the Hazel II can overcome this handicap because it has high output thrusters in the form of a tri booster unit or double shield boosters.

ARMAMENTS

Beam Saber

Vulcan Gun

Shield

HFW-GR·MR82-90mm GM Rifle

Multi-purpose Launchers

RX-121-2 Gundam TR-1 ［Hazel Owsla］

The RX-121-2 Gundam TR-1 [Hazel Owsla] is a version of the RX-121-2A Gundam TR-1 [Advanced Hazel] equipped with the Primrose emergency escape pod.

The Primrose was developed in order to increase the survival rates of the pilot and the mobile suit data without reducing the Hazel's performance, but because the Primrose replaces almost the entire upper body this version is called the Owsla to distinguish it from the normal one

Since the Primrose was designed for high extensibility, the Hazel Owsla can support even more optional weapons and extra equipment functions, and can use various options to adapt to different combat situations

Like the Primrose, the Owsla can be equipped with a wide variety of backpacks and optional weapons, including a sub arm unit, a optical sensor unit and leg enhancement parts of the RX-121-2A Gundam TR-1 [Advanced Hazel], the tri booster unit of the RX-121-2 Gundam TR-1 [Hazel II]

or the multi connector pod and shield boosters of the Advanced Hazel. Most configurations of the Hazel Owsla carry a long blade rifle, and this machine can also use the Primrose's mega particle cannons and missile pods as built-in weapons.

Most Hazel Owsla configurations use the same compact shoulder armor as the RX-121-1 Gundam TR-1 [Hazel Custom] Sniper Unit.

ARMAMENTS

Beam Saber

Vulcan Gun

Mega Particle Cannon

Long Blade Rifle

Shield

Mega Particle Cannon

Missile Pod Binder

12-shot Micro Missile Launcher

Chaff Dispenser

Emergency Escape Pod [Primrose]

Sub Arm Unit

Enhanced Shield Booster

Shield Booster

Multi-purpose Launchers

RX-121-2 Gundam TR-1 ［Hazel Owsla］ Gigantic Arm Unit

The FF-X29A G-Parts [Hrududu II], which can be attached to the ORX-005 Gaplant TR-5 [Hrairoo] is not just an enhancement part, but can also be used as a connecting platform for a variety of optional equipment.

Because all the different optional weapons developed for the TR series were constructed according to a unified standard, their parts can be easily connected and extended. Among the plans under consideration is an armament enhancement plan in which the arms of the Psyco Gundam

a transformable mobile armor developed by the Murasame Newtype research institute in Japan, are attached to the RX-121-2 Gundam TR-1 [Hazel Owsla]. The Psyco Gundam arms function not only as manipulators but also as attack units equipped with five-barrel beam cannons

Although it uses the arms of the Psyco Gundam, this machine is not equipped with a psycommu system. Another plan under consideration is to attach MRX-010 Psyco Gundam Mk-II arms and winch units, which could function as wire-guided remote attack weapons

ARMAMENTS

Beam Saber
Vulcan
Mega Particle Cannon
Shield
Gigantic Arm Unit
Psyco Gundam arms
5-barrel Beam Gun
Mega Particle Cannon
Missile Pod
Shield Boosters
Missile Pod Binder
12-shot Micro Missile Launcher
Chaff Dispenser
Long Blade Rifle
[Primrose]
Sub Arm Unit
Multi-purpose Launchers

RX-121-2 Gundam TR-1 ［Fiver II］

A configuration of Carl Matsubara's RX-121-2 Gundam TR-1 ［Hazel Owsla］ equipped with the RX-124 Gundam TR-6 [Fiver II] unit and FF-X29A G-Parts [Hrududu II] shoulder components.

ARMAMENTS

Hyper Long-range Beam Cannon

Diffuse Beam Cannons

I-field Generator

Primrose Escape Pod

YRMS-106+BL-85X Bi-Zack TR-2 ［Bigwig］

Developed for testing portable long-range beam cannon platform concept to be used by mobile suits, such as the Skiure or Burstliner from the One Year War; The Bi-Zack TR-2 [Bigwig] used a modified YRMS-106 Hi-Zack Pre-Production Type as a base unit to fill this role.

Several reasons were cited as to why the Hi-Zack was used as the core component. The Hi-Zack featured a more modular design than the GM series which previously served as the Federation Forces’ main mobile suit

making it simpler to replace its parts and easier to modify, making this machine particularly suitable for use with the TR-2 design concept.

The TR-2 [Bigwig] runs a second Hi-Zack generator for extra power diverted to its beam cannon. The unit is also equipped with two shields fitted with built-in attitude control verniers, one of which serves as a guard when the beam cannon is deployed.

The “thruster units” on its legs are independent modules, each containing a thermonuclear reactor, thrusters, propellant tanks, stabilizing claws and landing gear.

ARMAMENTS

Prototype High-output Long-range Beam Cannon

Bi-Zack Shield

Larger than the standard Hi-Zack shoulder shield, they are fitted with built-in attitude control verniers. One is attached to the right shoulder and the other is attached to the beam cannon as a guard.

Foot Claws

NRX-044 Prototype Asshimar TR-3 ［Kehaar］

Following the introduction of the NRX-044(R) Prototype Asshimar TR-3 [Kehaar] Space Type, the Titans further developed the Kehaar into the NRX-044 Prototype Asshimar TR-3 [Kehaar]

remodeled for atmospheric use after the completion of its space testing, and new tests were conducted to evaluate the durability of its transformation mechanisms under gravity

Thermonuclear engines were installed in the leg sections which serve as the Kehaar's main propulsion devices, giving it far greater thrust than the later production model. It was also equipped with a skirt unit containing supplemental thrusters for vertical takeoff.

Since this unit included fixed wings for stabilizing the machine's flight attitude, its silhouette in mobile armor form was very different from that of the production model

A beam gun similar to the Dom was installed in the left side of the Kehaar's chest, and its beam rifle can double as a beam axe. Also adapted from the Dom was its head which sported a cross design for its sensor array, unlike the Dom, it sported three "eyes" instead of just one.

ARMAMENTS

Spread Beam Gun

Beam Rifle

Beam Emitter

NRX-044(R) Prototype Asshimar TR-3 ［Kehaar］ Space Type

The development of the Asshimar series was started by the Earth Federation Forces in form of the NRX-044(R) Prototype Asshimar TR-3 [Kehaar]. Due to the high stresses placed on the transformation systems under gravity

a prototype machine was initially made for testing in zero gravity where the load was reduced. The construction of Kehaar is very complex and can be consider as an early movable frame. The Titans further developed the Kehaar into the NRX-044 Prototype Asshimar TR-3 [Kehaar].

RX-107 TR-4 ［Dandelion］

The RX-107 TR-4 [Dandelion] is a prototype atmospheric entry module developed for special operations. In recent years, the ballute system has been introduced as optional equipment which allows a mobile suit to enter the atmosphere independently

However, a descent using the ballute system requires a sequence of adjustments beforehand and transportation to satellite orbit by a carrier ship. Seeking a smoother method for Earth descent operations, the Titans remodeled the RX-107 Rosette to create the Dandelion

which has thrust and cruising range comparable to those of a mobile armor.

This machine can travel to a descent point in satellite orbit under its own power, even while carrying a mobile suit, and because it can function as a sub flight system after entering the atmosphere, it can engage in combat and change its landing point after entry

Although the Dandelion shifts between an atmospheric entry form, a mobile armor form, and a mobile suit form, this isn't a so-called "transformation."

Instead the machine is designed with the concept of a "form shift" adapted to the changing circumstances of atmospheric entry, in which little thought is given to returning to a previous form

Parts which become unnecessary after entering the atmosphere can thus be detached and discarded, and it's possible to purge all these parts, ultimately leaving only the core mobile suit which contains the cockpit block.

ARMAMENTS

Long-range Beam Rifle

Claw Arm

ORX-005 Gaplant TR-5

The ORX-005 Gaplant TR-5 is the transformable mobile armor which serves as the core unit of the ORX-005 Gaplant TR-5 [Fiver]. Although there are minor changes to some parts of the machine, it's basically the same as the standard version of the ORX-005 Gaplant.

The biggest difference is that the characteristic movable shield binders attached to the Gaplant's arms have been replaced with shield boosters. Because of the intense G-forces produced by the high thrust of these movable shield boosters

the Gaplant became a machine exclusively for enhanced humans, and the Gaplant TR-5 has been equipped with the shield boosters tested by the Test Team in order to reduce the stress on ordinary pilots. The transformation mechanisms are unaffected by the replacement of the binders

so it can use its mobile armor and mobile suit forms as the situation requires, just like the normal Gaplant. This makes the Gaplant TR-5 an excellent transformable mobile armor which still has fighting capabilities even when it purges the enhancement parts of the TR-5 [Fiver]

The mobile suit form of the Gaplant TR-5, which has a movable thruster unit on its back and a shield booster attached to each arm, has a layout very close to that of the Hazel's assault form

This is because the Hazel combat data accumulated by the Titans Test Team was used in the development of the Gaplant TR-5, and as a result the behavior and handling of this machine are remarkably similar to those of the Hazel

This is also the reason why Wes Murphy is able to freely control the Gaplant TR-5 the very first time he uses it in ground combat. Although the Gaplant is a high-performance machine developed for use by enhanced humans,

the Gaplant TR-5 created using feedback from Hazel combat data could be considered almost a sibling to the Hazel.

In addition to the shield boosters on its arms, and the new sensor unit and V antennas on its head, modifications have also been made to the main engines in the backpack of the Gaplant TR-5.

The engine unit has been replaced with a nuclear thermal jet/rocket engine similar to those used in other machines of the TR series. Unlike the standard Gaplant, the Gaplant TR-5 carries a hand weapon in the form of a long blade rifle,

which is mounted on the underside of the machine in mobile armor form. The Gaplant TR-5 can be equipped with a winch shield based on the nose sensor unit of the FF-X29A G-Parts [Hrududu]

Once launched, the nose unit of this winch shield can be remote-controlled via wire guidance, using the same technology as the earlier Stutzer series. This device can be held in the hand of the Gaplant TR-5, or attached to the Hrududu in place of the standard nose unit

ARMAMENTS

Beam Saber

Shield Booster

Long Blade Rifle

ORX-005 Gaplant TR-5 ［Fiver］

A special Gaplant design for supersonic penetration via a ballistic trajectory tactic, similar to Intercontinental ballistic missile. A ballistic trajectory involves launching from the surface and temporarily escaping the atmosphere.

After re-entering the atmosphere, the machine follows a parabolic course to its target point while maintaining the vast acceleration obtained from the effects of gravity.

The base machine of Fiver is Gaplant in mobile armor mode with new sensor installed and beam cannon removed, the Gaplant would be combined with addition parts. The backpack unit contains three generators of various sizes, and connects directly to the Gaplant's own back thrusters.

A nose unit is attached to the front of the machine, and a heat-resistant field unit with coolant gas emitters is attached to its underside

Two defensive binders are attached to the backpack unit and the Gaplant's arms. Each defensive binder contains one I-field generator and ten beam cannons, whose protective covers are blown off prior to use

Since the I-field generators consume virtually all of the machine's energy output, the beam cannons are powered by energy packs. The lower section of each binder houses a rack of twelve energy packs for this purpose, and this section terminates in a thruster and propellant tank

Each binder can also carry one escort mobile suit, and the upper section of each binder has a manipulator arm to hold these mobile suits in place. The upper and lower sections can be opened up so that the diffuse beam cannons all face forward.

ARMAMENTS, SPECIAL EQUIPMENT & FEATURES

Diffuse Beam Cannon

Long Blade Rifle

Shield Booster

I-field Beam-deflecting Barrier Generator

ORX-005 Gaplant TR-5 ［Hrairoo］

One problem with the standard ORX-005 Gaplant is the intense G-force produced by the movable shield binders, making Gaplant best used with a Newtype pilot. Due to this, when it was first produced, the ORX-005 Gaplant TR-5, it was mounted with booster shields used by TR-1 Hazel

Aside from this, a few changes were applied during the TR-5's initial service, such as applying an enhanced sensor unit and V-fin onto the head sensor, and replacing the main engines in the backpack with a thermonuclear hybrid jet-rocket engine, as with other TR series machines

For its main armament, the TR-5 carries a long blade rifle, which is mounted on the underside of the machine in mobile armor form.

Later on, near the end of Gryps conflict, the TR-5 Hrairoo is further refined as an Area Dominance Mobile Armor, similar in purpose to RX-78GP03 Gundam "Dendrobium", but for all three major environment (atmosphere, ground, space).

The booster shields were changed back to the moveable shield binders. The side armor and back armor have additional thrusters and armor mounted onto it, greatly increasing its maneuverability and defense; the back waist armor also comes with a moveable hardpoint

allowing it to mount an additional manipulator arm.

The front waist armor is also enhanced, and thus now has spray beam emitters for defense, as well as two hidden arms underneath. The long blade rifle is upgraded to be able to equip with 2 booster-type shields,

which further increase its linear motions (standard booster shields), attack ability (micro missiles shields) or defense ability (spray beam shield).

Furthermore, it was mounted with Hrududu II shoulder units, each mounted on a hardpoint located on the inside of shoulder armor. On the right shoulder mounts a shoulder booster-claw units with beam emitters hidden in it,

and can mount the long blade rifle to form a very powerful beam cannon; on the left is the generator unit

Due to the Hrududu II, which is based on the drum frames, Gaplant gain four more hard points in total, allowing it to mount additional manipulators arms (and by extension, wince shield units) and even Giant arms of Psyco Gundam, allowing it to execute all range attacks

ARMAMENTS

Beam Cannon

Mounted within the shield binders, has higher output than a standard beam rifle.

Beam Saber

Stored within the sideskirts, standard equipment for melee combat

Spread Beam

Mounted between the legs of the unit. Has additional thrusters mounted around it.

Long Blade Rifle

A beam pistol with a long barrel attachment. The attached blade is a heat blade.

ORX-005 Gaplant TR-5 ［Advanced Hrairoo］

In the final battle, the Titan test team acquired another Gaplant, and it was refined into Advanced Hrairoo.

Unlike the Hrairoo, the Advanced Hrairoo does not mount Hrududu II shoulder units; instead, the shield binder is enhanced with even more thrusters; a spread mega particle cannon was mounted on the backpack engine black, a grenade launcher over the left front waist armor,

Latest Threads Unrolled: