Read on Twitter
DRDO's exploding foil initiator or slapper detonators used in the firing mechanism of nuclear devices
Two types have been developed
1. Ceramic based
2. PCB based
The EFI detonator is similar to d design of an exploding bridge-wire in that a thin foil is exploded by the discharge
Two types have been developed
1. Ceramic based
2. PCB based
The EFI detonator is similar to d design of an exploding bridge-wire in that a thin foil is exploded by the discharge
+
of a high voltage capacitor; however, the energy from the exploding conductive foil (often copper) drives a thin plastic disc (often Kapton) situated on top at 2–5 km s−1.
These detonators r used for vry precise detonation of d multiple explosive lens surrounding the nuclear
of a high voltage capacitor; however, the energy from the exploding conductive foil (often copper) drives a thin plastic disc (often Kapton) situated on top at 2–5 km s−1.
These detonators r used for vry precise detonation of d multiple explosive lens surrounding the nuclear
+
core in a simultaneous manner for supersonic compression along the geometric axis.
Timing accuracies > 10 ns
It is the shock from the polymer disc hitting the explosive that causes the detonator to function.
Essential for SLBM due to the overriding safety factor.
core in a simultaneous manner for supersonic compression along the geometric axis.
Timing accuracies > 10 nsIt is the shock from the polymer disc hitting the explosive that causes the detonator to function.Essential for SLBM due to the overriding safety factor.
+
Reference: http://drdo.go.in , P. M. Dickson's journal
Reference: http://drdo.go.in , P. M. Dickson's journal
